Forum
»
Any reason NOT to buy a Coyote Swapped New Edge Mustang?
05-19-2023, 10:00 AM
-
#1
- bsmit107
- Living in 3024
-
- bsmit107
- Living in 3024
- Join Date: May 2010
- Location: Georgia, United States
- Posts: 21,085
- Rep Power: 189967
-
-
Any reason NOT to buy a Coyote Swapped New Edge Mustang?





EDIT: See post 16...Just found out while doing research on the T45/Coyote combo......the car is a multi part MotorTrend build from 2019. FUUK!
Gen 2 Coyote 5.0 liter V8 crate motor
-Dynod at 435rwhp & 400rwtq
-Ford Performance wiring harness
-Moroso road-race oil pan
-BBK long tube headers
-BBK catless X-pipe
-Hooker performance exhaust
-Vintage Air Frontrunner AC/Power Steering/Alternator drive
-ACT HD/Performance clutch
-ACT lightweight (14.5 pounds) flywheel
-Rebuilt T45 manual trans
-Full QA1 suspension
-QA1 Tubular K-Member
-Adjustable coilovers
-Aeromotive Stealth dual fuel pumps
-Fluidyne radiator
-Twin Spal brushless radiator fans
-Momo steering wheel
-ProCar Sportsman Pro seats
-13" Baer Brakes w/ 6 piston calipers in front and 4 piston calipers in rear
-18" Rovos wheels (9" front, 10.5" rear)
-Quick Performance 9-inch rear w/ fabricated housing
-3.70 gear ratio with Eaton Truetrac locker
-35 spline rear axles
-BMR subframe connectors
-BMR torque box reinforcements
-Dakota Digital VHX gauge cluster
-SR Performance Sport short throw shifter
Talk me out of it. Guy wants 17k
05-19-2023, 10:01 AM
-
#2
- SteadySmokin
- Banned
-
- SteadySmokin
- Banned
- Join Date: May 2023
- Posts: 6,413
- Rep Power: 0
-
-
its yellow
05-19-2023, 10:02 AM
-
#3
- TXBuddy
- Registered User
-
- TXBuddy
- Registered User
- Join Date: Oct 2010
- Location: United States
- Posts: 17,608
- Rep Power: 210472
-
-
If you are in to NE mustangs, and you trust the work done, should be awesome. Reliable set up
US Army 1998-2020
Army NG 1992-98
★Combat Veterans Crew★
Texas Tech Alumni '98 & '07
�Tolerance and apathy are the last virtues of a dying society.� ~ Aristotle
*Vasectomy crew
05-19-2023, 10:03 AM
-
#4
- Evolutionary1
- Registered User
-
- Evolutionary1
- Registered User
- Join Date: Jul 2006
- Location: United States
- Posts: 36,489
- Rep Power: 115290
-
-
If you can afford to buy it twice. sure
05-19-2023, 10:03 AM
-
#5
05-19-2023, 10:05 AM
-
#6
- HateLiberals
- Registered User
-
- HateLiberals
- Registered User
- Join Date: Jul 2022
- Age: 56
- Posts: 14,808
- Rep Power: 129650
-
-
Eh price is too high, t45 sucks
I don't see any ac lines hooked up or listed
Gen 2 is the good yote motor though. If it was Gen 2 and a semi built 6r80e with ac then the price would be ok
I don't see any ac lines hooked up or listed
Gen 2 is the good yote motor though. If it was Gen 2 and a semi built 6r80e with ac then the price would be ok
05-19-2023, 10:06 AM
-
#7
- bsmit107
- Living in 3024
-
- bsmit107
- Living in 3024
- Join Date: May 2010
- Location: Georgia, United States
- Posts: 21,085
- Rep Power: 189967
-
-
Originally Posted By TXBuddy⏩
Grew up idolizing the New Edge and always wanting one till I drove one with the 2v 4.6..total poop. lol.....this would be a dream build for me.If you are in to NE mustangs, and you trust the work done, should be awesome. Reliable set up
Originally Posted By Evolutionary1⏩
Cash on hand and I'm tired of saving $2k/month and just looking at it sitting in my savings/CD's/Investments. I've been wanting to do this and just "waiting for the right time" to buy a fun weekend car for the last 12-15 years and just keep talking myself out of it.If you can afford to buy it twice. sure
05-19-2023, 10:08 AM
-
#8
- Evolutionary1
- Registered User
-
- Evolutionary1
- Registered User
- Join Date: Jul 2006
- Location: United States
- Posts: 36,489
- Rep Power: 115290
-
-
Originally Posted By bsmit107⏩
Sounds like you've already made up your mind.Grew up idolizing the New Edge and always wanting one till I drove one with the 2v 4.6..total poop. lol.....this would be a dream build for me.
Cash on hand and I'm tired of saving $2k/month and just looking at it sitting in my savings/CD's/Investments. I've been wanting to do this and just "waiting for the right time" to buy a fun weekend car for the last 12-15 years and just keep talking myself out of it.
Cash on hand and I'm tired of saving $2k/month and just looking at it sitting in my savings/CD's/Investments. I've been wanting to do this and just "waiting for the right time" to buy a fun weekend car for the last 12-15 years and just keep talking myself out of it.
05-19-2023, 10:09 AM
-
#9
- bsmit107
- Living in 3024
-
- bsmit107
- Living in 3024
- Join Date: May 2010
- Location: Georgia, United States
- Posts: 21,085
- Rep Power: 189967
-
-
Originally Posted By HateLiberals⏩
My thoughts as well. Unless it's a beefed up T45 that TQ is eventually going to get it.Eh price is too high, t45 sucks
I don't see any ac lines hooked up or listed
Gen 2 is the good yote motor though. If it was Gen 2 and a semi built 6r80e with ac then the price would be ok
I don't see any ac lines hooked up or listed
Gen 2 is the good yote motor though. If it was Gen 2 and a semi built 6r80e with ac then the price would be ok
In his post he says NO AC....fine with me as it's going to sit in the garage most of the time.
Going to look at it this afternoon.....probably going to throw $14,500 at him if it all checks out.
05-19-2023, 10:10 AM
-
#10
05-19-2023, 10:11 AM
-
#11
- RICHSTRONG
- Pa BITCHES
-
- RICHSTRONG
- Pa BITCHES
- Join Date: Mar 2012
- Location: United States
- Height: 6'2"
- Weight: 350 lbs
- Posts: 85,294
- Subscribers: 15
- Rep Power: 1662183
-
-
Talk to our resident expert on 'Stangs'...Burtle. He owned a kick ass V6 automatic one about 7-8 yrs ago.
See monster0ultra's sig
05-19-2023, 10:13 AM
-
#12
- HateLiberals
- Registered User
-
- HateLiberals
- Registered User
- Join Date: Jul 2022
- Age: 56
- Posts: 14,808
- Rep Power: 129650
-
-
Even if you don't like ac it cucks the value for his price and resale. In AZ that car would never sell without it. If you don't care about racing and just want to bang gears it will prob be semi fun but still wouldn't pay 14k. Used prices and modded yote prices are getting slaughtered in this economy so I would keep camping
05-19-2023, 10:14 AM
-
#13
05-19-2023, 10:14 AM
-
#14
- TXBuddy
- Registered User
-
- TXBuddy
- Registered User
- Join Date: Oct 2010
- Location: United States
- Posts: 17,608
- Rep Power: 210472
-
-
This is my 93 fox
H/C/I, supercharger, etc..everything done


H/C/I, supercharger, etc..everything done


US Army 1998-2020
Army NG 1992-98
★Combat Veterans Crew★
Texas Tech Alumni '98 & '07
�Tolerance and apathy are the last virtues of a dying society.� ~ Aristotle
*Vasectomy crew
05-19-2023, 10:18 AM
-
#15
- Redfish225
- Hunter/Fisherbreh
-
- Redfish225
- Hunter/Fisherbreh
- Join Date: Aug 2012
- Posts: 69,167
- Rep Power: 903956
-
-
Watch out utility poles, guard rails, cars sitting in traffic, trees, and ditches.
I loe e.
05-19-2023, 10:22 AM
-
#16
- bsmit107
- Living in 3024
-
- bsmit107
- Living in 3024
- Join Date: May 2010
- Location: Georgia, United States
- Posts: 21,085
- Rep Power: 189967
-
-
Y'all arent going to believe this......but I just found the car in a Motor Trend build article from 2019.
https://www.motortrend.com/how-to/sw...-crate-engine/
Im about chitting myself right now.
https://www.motortrend.com/how-to/sw...-crate-engine/
Im about chitting myself right now.
05-19-2023, 10:24 AM
-
#17
- TBO1313
- Never Registered
-
- TBO1313
- Never Registered
- Join Date: Dec 2013
- Posts: 28,898
- Rep Power: 342064
-
-
Originally Posted By bsmit107⏩
Don't do it man. You live in GA and that thing isn't even a vert. AC would be a massive pain in the ass to get done and you're gonna need it. No one goes cruisin in the winter.My thoughts as well. Unless it's a beefed up T45 that TQ is eventually going to get it.
In his post he says NO AC....fine with me as it's going to sit in the garage most of the time.
Going to look at it this afternoon.....probably going to throw $14,500 at him if it all checks out.
In his post he says NO AC....fine with me as it's going to sit in the garage most of the time.
Going to look at it this afternoon.....probably going to throw $14,500 at him if it all checks out.
I'm a new edge mustang lover myself and had a triple black GT vert. For not that much more money you could get a 03 or 04 terminator cobra and those things are insanely badass, faster than a stock coyote and very easily moddable
Edit: Just saw the article on it. Looks really clean. I was expecting it to be completely clapped out like the swaps I usually see. Might be worth it if you don't mind sweating your balls off
6'2"
OMAD results: 2/15/19-235, 10/13/19-190
OHP-205 Bench- 245 Squat - 405 C&J - 245
2021 Spring cut: 195lbs starting weight
05-19-2023, 10:26 AM
-
#18
- crupiea
- Lifetime Member
-
- crupiea
- Lifetime Member
- Join Date: Aug 2006
- Location: San Diego, California, United States
- Posts: 42,878
- Rep Power: 232216
-
-
Looks cool but also looks like he did all the work himself.
That means it when it does run it will be fun. Also means that 90% of the time it wont run and you will be underneath it just like in those pics working on it and wondering what in the hell the guy was thinking.
That means it when it does run it will be fun. Also means that 90% of the time it wont run and you will be underneath it just like in those pics working on it and wondering what in the hell the guy was thinking.
"To be a warrior is not a simple matter of wishing to be one. It is rather an endless struggle that will go on to the very last moment of our lives. Nobody is born a warrior, in exactly the same way that nobody is born an average man. We make ourselves into one or the other."-- Carlos Castaneda
05-19-2023, 10:30 AM
-
#19
- bsmit107
- Living in 3024
-
- bsmit107
- Living in 3024
- Join Date: May 2010
- Location: Georgia, United States
- Posts: 21,085
- Rep Power: 189967
-
-
Originally Posted By crupiea⏩
See Post #16.....It's a MotorTrend build car. there's 2 articles on it. I found the article while researching the T45/Coyote combo. Build was done in South Carolina mid 2019Looks cool but also looks like he did all the work himself.
That means it when it does run it will be fun. Also means that 90% of the time it wont run and you will be underneath it just like in those pics working on it and wondering what in the hell the guy was thinking.
That means it when it does run it will be fun. Also means that 90% of the time it wont run and you will be underneath it just like in those pics working on it and wondering what in the hell the guy was thinking.
05-19-2023, 10:32 AM
-
#20
- HateLiberals
- Registered User
-
- HateLiberals
- Registered User
- Join Date: Jul 2022
- Age: 56
- Posts: 14,808
- Rep Power: 129650
-
-
If it has all the hvac stuff still under the dash adding ac isn't that big of a deal. Compressor and have lines made and you're 90% there. But still 12k IMO
05-19-2023, 10:35 AM
-
#21
Originally Posted By RICHSTRONG⏩
I had a '76 Mercury Capri (Mustang adjacent).Talk to our resident expert on 'Stangs'...Burtle. He owned a kick ass V6 automatic one about 7-8 yrs ago.
I loved it. It was one of my favorite cars.
Do it, OP.
Mustang crew checking in.
05-19-2023, 10:38 AM
-
#22
05-19-2023, 10:38 AM
-
#23
- HateLiberals
- Registered User
-
- HateLiberals
- Registered User
- Join Date: Jul 2022
- Age: 56
- Posts: 14,808
- Rep Power: 129650
-
-
I remember fapping to that vid in like 2008
05-19-2023, 10:42 AM
-
#24
- Kev1972
- Registered User
-
- Kev1972
- Registered User
- Join Date: Jun 2013
- Location: Big Arm, Montana, United States
- Posts: 49,924
- Rep Power: 287644
-
-
Why wouldn't you just buy a late model GT for 20k?
That thing has a dated interior and out of style unpopular chassis with 20+ years of grease and rusted bolts holding it together.
No thanks Jeffrey.
That thing has a dated interior and out of style unpopular chassis with 20+ years of grease and rusted bolts holding it together.
No thanks Jeffrey.
Motorcycle crew
Army veteran crew
One Meal a day crew
05-19-2023, 11:56 AM
-
#25
05-19-2023, 12:03 PM
-
#26
Originally Posted By bsmit107⏩
Yes.Any more wisdom?
That sh*t is gonna fall apart way before 10 or 12 years, and is going to be a time and energy suck while you have it.
If it were me I'd spend the money on hookers and blow instead so at least you'll feel like you got something out of it.
And this is coming from someone who bought a race motor before.
05-19-2023, 12:06 PM
-
#27
- Kev1972
- Registered User
-
- Kev1972
- Registered User
- Join Date: Jun 2013
- Location: Big Arm, Montana, United States
- Posts: 49,924
- Rep Power: 287644
-
-
Originally Posted By 401Delta⏩
.I'm sure the guy isn't selling it because everything is running perfectly.Yes.
That sh*t is gonna fall apart way before 10 or 12 years, and is going to be a time and energy suck while you have it.
If it were me I'd spend the money on hookers and blow instead so at least you'll feel like you got something out of it.
And this is coming from someone who bought a race motor before.
That sh*t is gonna fall apart way before 10 or 12 years, and is going to be a time and energy suck while you have it.
If it were me I'd spend the money on hookers and blow instead so at least you'll feel like you got something out of it.
And this is coming from someone who bought a race motor before.
Motorcycle crew
Army veteran crew
One Meal a day crew
05-19-2023, 12:51 PM
-
#28
- bsmit107
- Living in 3024
-
- bsmit107
- Living in 3024
- Join Date: May 2010
- Location: Georgia, United States
- Posts: 21,085
- Rep Power: 189967
-
-
Originally Posted By 401Delta⏩
Im sure the wife and daughter will love that option. lolYes.
That sh*t is gonna fall apart way before 10 or 12 years, and is going to be a time and energy suck while you have it.
If it were me I'd spend the money on hookers and blow instead so at least you'll feel like you got something out of it.
And this is coming from someone who bought a race motor before.
That sh*t is gonna fall apart way before 10 or 12 years, and is going to be a time and energy suck while you have it.
If it were me I'd spend the money on hookers and blow instead so at least you'll feel like you got something out of it.
And this is coming from someone who bought a race motor before.
I've had several cars over the last few years....bought cheap with the intention of modding and when reality sets in, I just dont have the time, so I sold them.
My dream build would be a Coyote (or LS) swapped new edge, full suspension....blah blah....basically this car. The works already done. It's going to sit in the garage will Saturday/Sunday when I feel like going for a drive.
If it's not ragged out (which it might be) I don't see what the issue is. All of the work was done in 2019, so it's not that old. I have no problem with maintenance and replacing things like clutch/brakes/etc that are normal wear items that would need to be done on a 2015 Mustang anyway.
Also....not a race motor. It's a Ford Crate motor dyno tuned with bold-ons. These things hands 15lbs of boost on stock internals with no problem.
Originally Posted By Kev1972⏩
I'll know tomorrow. Judging from his FB Marketplace page, he's a regular flipper of cars..I'm sure the guy isn't selling it because everything is running perfectly.
05-19-2023, 12:53 PM
-
#29
- bsmit107
- Living in 3024
-
- bsmit107
- Living in 3024
- Join Date: May 2010
- Location: Georgia, United States
- Posts: 21,085
- Rep Power: 189967
-
-
Originally Posted By Kev1972⏩
I want older/raw feel.Why wouldn't you just buy a late model GT for 20k?
That thing has a dated interior and out of style unpopular chassis with 20+ years of grease and rusted bolts holding it together.
No thanks Jeffrey.
That thing has a dated interior and out of style unpopular chassis with 20+ years of grease and rusted bolts holding it together.
No thanks Jeffrey.
Don't care about tech/comforts.....this will be strictly a drive on the weekend fun haver. Will probably gut & try to sell the interior anyway.
05-19-2023, 12:56 PM
-
#30
- HateLiberals
- Registered User
-
- HateLiberals
- Registered User
- Join Date: Jul 2022
- Age: 56
- Posts: 14,808
- Rep Power: 129650
-
-
It looks like it has a crate motor and a crate ecu swap, there is nothing to not run properly. Gen2 yote motors have the best block of the bunch. Install oil pump gears and a blower with a crank support and make 750+whp for years with zero worries on
Bookmarks
-
- Digg
-
- del.icio.us
-

- StumbleUpon
-
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts