Thread: Whatcha know about tools?
11-27-2020, 09:36 AM
-
#1
Whatcha know about tools?
For peeps that don't live on misc I'm living in a house that I inherited from my mom; has a mortgage still, high taxes, and needs work.
Feels like selling is the right move, but also don't have a place to go if I manage that. Could sell as is/investor types and I've wondered if that would be a wash when you factor in fees and cost of repairs.
Most recently working on a low cost cosmetic fix (cleaning, paint, light fixtures). The kitchen will be the biggest project. Cabinets are original builder grade that a prior owner added ugly pulls to and coated with latex paint that wasn't done right and looks like hell. Laminate counters are dated and one by the sink is in bad condition. The cabinets are a type that don't have to have pulls so my plan is to strip/sand/paint, try putting new laminate on the counters, and need a new faucet. Blah.
I have a decent stock of hand tools, but no power tools of my own since my divorce. Ryobi seems to be well regarded and isn't as expensive as Dewalt. At least need a drill/driver. Not sure if brushless is that important/worth it?
This set is $$$, but includes a lot of stuff. Not sure if it is good start, or if I should just add as needed. Doesn't have miter/angle/table saw which could be nice for tile/molding if I get that far.
https://www.homedepot.com/p/RYOBI-ON...00KN/314110025
Oh, and I've done a good amount of reno, but usually power tools/plumbing I've had help with from my grandpa, dad, or FIL, which isn't an option now. I've done a lot of cleaning/paint/planning/shopping/yard work and a little electrical.
Feels like selling is the right move, but also don't have a place to go if I manage that. Could sell as is/investor types and I've wondered if that would be a wash when you factor in fees and cost of repairs.
Most recently working on a low cost cosmetic fix (cleaning, paint, light fixtures). The kitchen will be the biggest project. Cabinets are original builder grade that a prior owner added ugly pulls to and coated with latex paint that wasn't done right and looks like hell. Laminate counters are dated and one by the sink is in bad condition. The cabinets are a type that don't have to have pulls so my plan is to strip/sand/paint, try putting new laminate on the counters, and need a new faucet. Blah.
I have a decent stock of hand tools, but no power tools of my own since my divorce. Ryobi seems to be well regarded and isn't as expensive as Dewalt. At least need a drill/driver. Not sure if brushless is that important/worth it?
This set is $$$, but includes a lot of stuff. Not sure if it is good start, or if I should just add as needed. Doesn't have miter/angle/table saw which could be nice for tile/molding if I get that far.
https://www.homedepot.com/p/RYOBI-ON...00KN/314110025
Oh, and I've done a good amount of reno, but usually power tools/plumbing I've had help with from my grandpa, dad, or FIL, which isn't an option now. I've done a lot of cleaning/paint/planning/shopping/yard work and a little electrical.
INTP Crew
Inattentive ADD Crew
Mom That Miscs Crew
11-27-2020, 09:38 AM
-
#2
11-27-2020, 09:38 AM
-
#3
- hendrixfreak70
- My eyes are up here.
-
- hendrixfreak70
- My eyes are up here.
- Join Date: Feb 2016
- Location: United States
- Posts: 29,358
- Subscribers: 16
- Rep Power: 748157
-
-
Inb4 something something my tool.
11-27-2020, 09:40 AM
-
#4
11-27-2020, 09:40 AM
-
#5
11-27-2020, 09:42 AM
-
#6
- MajorTendonitis
- Join Date: Jan 2016
- Location: East Kootenays BC
- Age: 65
- Height: 5'8"
- Weight: 241 lbs
- Posts: 42,002
- Subscribers: 8
- Rep Power: 717192
-
-
Link doesn’t work ?
Back with my Fam
11-27-2020, 09:43 AM
-
#7
- propreffered7
- Registered User
-
- propreffered7
- Registered User
- Join Date: Mar 2010
- Posts: 36,839
- Rep Power: 86393
-
-
ryobi is ok. it will prob get the job done but it's known as a less expensive brand
milwaukee, dewalt, makita are prob the best trade tools. festool some fancy german chit, which is the opposite; prob more expensive than quality
milwaukee, dewalt, makita are prob the best trade tools. festool some fancy german chit, which is the opposite; prob more expensive than quality
11-27-2020, 09:44 AM
-
#8
- MajorTendonitis
- Join Date: Jan 2016
- Location: East Kootenays BC
- Age: 65
- Height: 5'8"
- Weight: 241 lbs
- Posts: 42,002
- Subscribers: 8
- Rep Power: 717192
-
-
Originally Posted By LtGoose⏩
And this .Ryobi?
Milwaukee would be my first choice , dewalt second
Back with my Fam
11-27-2020, 09:45 AM
-
#9
- HayZues Christi
- Registered User
-
- HayZues Christi
- Registered User
- Join Date: Oct 2007
- Age: 40
- Posts: 33,178
- Rep Power: 232547
-
-
Only thing that matters is battery life and warranty length (not some bs extended you have to buy. )
18v seems weak tbh.
18v seems weak tbh.
Ol' 71st street. The devil that birthed me.
606 G0D.
11-27-2020, 09:48 AM
-
#10
Originally Posted By KingSWRV⏩
m'kay. wasn't my idea though.You shouldn’t have gotten a divorce
None of us are gonna help you because of that.
That’s your husbands role that you didn’t appreciate enough, so now suffer the consequences.
None of us are gonna help you because of that.
That’s your husbands role that you didn’t appreciate enough, so now suffer the consequences.
Originally Posted By LtGoose⏩
Ryobi?
Personally I wouldn't buy anything other than Milwaukee. Maybe Makita if I was only using it to put a shelf on the wall
Personally I wouldn't buy anything other than Milwaukee. Maybe Makita if I was only using it to put a shelf on the wall
Originally Posted By propreffered7⏩
aren't they a lot more expensive?ryobi is ok. it will prob get the job done but it's known as a less expensive brand
milwaukee, dewalt, makita are prob the best trade tools. festool some fancy german chit, which is the opposite; prob more expensive than quality
milwaukee, dewalt, makita are prob the best trade tools. festool some fancy german chit, which is the opposite; prob more expensive than quality
Originally Posted By MajorTendonitis⏩
because you are in Canada maybe?Link doesn’t work ?
INTP Crew
Inattentive ADD Crew
Mom That Miscs Crew
11-27-2020, 09:49 AM
-
#11
- latverian41
- Registered User
-
- latverian41
- Registered User
- Join Date: Mar 2016
- Age: 51
- Posts: 28,227
- Rep Power: 123665
-
-
Originally Posted By KingSWRV⏩
Lol.You shouldn’t have gotten a divorce
None of us are gonna help you because of that.
That’s your husbands role that you didn’t appreciate enough, so now suffer the consequences.
None of us are gonna help you because of that.
That’s your husbands role that you didn’t appreciate enough, so now suffer the consequences.
Depending on if OP is a sloot and caused the divorce is a big factor on if i agreee with you or not. If she is a. Sloot who slooted on her hubby then yes. Karma is a bitcch and its very real
"it takes a wise man to know when he is in error and a noble man to admit to it"
11-27-2020, 09:51 AM
-
#12
- propreffered7
- Registered User
-
- propreffered7
- Registered User
- Join Date: Mar 2010
- Posts: 36,839
- Rep Power: 86393
-
-
Originally Posted By katya422⏩
possibly. i bet that ryobi could get the job done im just saying they're not the highest qualityaren't they a lot more expensive?
my opinion of the brands is makita is the most consistent and has the largest line (other tools you could use batteries for). generally the best batteries too
milwaukee has the most powerful motors but don't last as long and battery life is worse
dewalt fluctuates with certain tools being better than others but also has a large line
11-27-2020, 09:52 AM
-
#13
- Battlefury
- Savage the body.
-
- Battlefury
- Savage the body.
- Join Date: Jan 2014
- Location: United States Of America, Philippines
- Posts: 19,226
- Rep Power: 57673
-
-
Don't buy a set only buy the things that you are going to use, you won't be using the whole set.
☠️We are here to laugh at the odds and live our lives so well, that death will tremble to take us.☠️
🔥Equality is a lie, I am stronger!🔥
🩸Semen Retention for more aggression and motivation!🩸
☠️Death is just an illusion a transition of worlds,don’t fear it for your faith is already in the hands of the Gods.☠️
🔥Prayers,Rituals,Sacrifices,Symbolism.🔥
🔥Only those that can control the dark side can ever truly be free.🔥
11-27-2020, 09:52 AM
-
#14
- elterrible987
- Banned
-
- elterrible987
- Banned
- Join Date: Jan 2010
- Posts: 51,859
- Rep Power: 0
-
-
Originally Posted By imbored205⏩
This OP going to need to find some SIMPpost this on reddit and they will PM you offering to fly out and help
beware though if you dont fuk them they will get irate when they finally figure out you used them, but if youre good you can lead them on for months or years
11-27-2020, 09:52 AM
-
#15
First and foremost you should stay in the kitchen.
Second, the name on the tool isn't always indicative of the quality...name brand stuff at a big box store won't be the same as the same brand at a contractor supply outlet.
Beyond that, if you didn't already know that, you might as well go buy a little tikes builder set at Toys r Us and call it a day.
Good luck with your lesbian homowner goals.
Second, the name on the tool isn't always indicative of the quality...name brand stuff at a big box store won't be the same as the same brand at a contractor supply outlet.
Beyond that, if you didn't already know that, you might as well go buy a little tikes builder set at Toys r Us and call it a day.
Good luck with your lesbian homowner goals.
11-27-2020, 09:53 AM
-
#16
- HayZues Christi
- Registered User
-
- HayZues Christi
- Registered User
- Join Date: Oct 2007
- Age: 40
- Posts: 33,178
- Rep Power: 232547
-
-
Originally Posted By latverian41⏩
Is karma the name of the dcfs agent who is going to come take your kid away?Lol.
Depending on if OP is a sloot and caused the divorce is a big factor on if i agreee with you or not. If she is a. Sloot who slooted on her hubby then yes. Karma is a bitcch and its very real
Depending on if OP is a sloot and caused the divorce is a big factor on if i agreee with you or not. If she is a. Sloot who slooted on her hubby then yes. Karma is a bitcch and its very real
Ol' 71st street. The devil that birthed me.
606 G0D.
11-27-2020, 09:53 AM
-
#17
Originally Posted By katya422⏩
is it necessary to sell the house now, as opposed to live there for the foreseeable future and renovate it as necessary? because doing this kind of thing yourself will take alot of time.For peeps that don't live on misc I'm living in a house that I inherited from my mom; has a mortgage still, high taxes, and needs work.
Feels like selling is the right move, but also don't have a place to go if I manage that. Could sell as is/investor types and I've wondered if that would be a wash when you factor in fees and cost of repairs.
Most recently working on a low cost cosmetic fix (cleaning, paint, light fixtures). The kitchen will be the biggest project. Cabinets are original builder grade that a prior owner added ugly pulls to and coated with latex paint that wasn't done right and looks like hell. Laminate counters are dated and one by the sink is in bad condition. The cabinets are a type that don't have to have pulls so my plan is to strip/sand/paint, try putting new laminate on the counters, and need a new faucet. Blah.
I have a decent stock of hand tools, but no power tools of my own since my divorce. Ryobi seems to be well regarded and isn't as expensive as Dewalt. At least need a drill/driver. Not sure if brushless is that important/worth it?
This set is $$$, but includes a lot of stuff. Not sure if it is good start, or if I should just add as needed. Doesn't have miter/angle/table saw which could be nice for tile/molding if I get that far.
https://www.homedepot.com/p/RYOBI-ON...00KN/314110025
Oh, and I've done a good amount of reno, but usually power tools/plumbing I've had help with from my grandpa, dad, or FIL, which isn't an option now. I've done a lot of cleaning/paint/planning/shopping/yard work and a little electrical.
Feels like selling is the right move, but also don't have a place to go if I manage that. Could sell as is/investor types and I've wondered if that would be a wash when you factor in fees and cost of repairs.
Most recently working on a low cost cosmetic fix (cleaning, paint, light fixtures). The kitchen will be the biggest project. Cabinets are original builder grade that a prior owner added ugly pulls to and coated with latex paint that wasn't done right and looks like hell. Laminate counters are dated and one by the sink is in bad condition. The cabinets are a type that don't have to have pulls so my plan is to strip/sand/paint, try putting new laminate on the counters, and need a new faucet. Blah.
I have a decent stock of hand tools, but no power tools of my own since my divorce. Ryobi seems to be well regarded and isn't as expensive as Dewalt. At least need a drill/driver. Not sure if brushless is that important/worth it?
This set is $$$, but includes a lot of stuff. Not sure if it is good start, or if I should just add as needed. Doesn't have miter/angle/table saw which could be nice for tile/molding if I get that far.
https://www.homedepot.com/p/RYOBI-ON...00KN/314110025
Oh, and I've done a good amount of reno, but usually power tools/plumbing I've had help with from my grandpa, dad, or FIL, which isn't an option now. I've done a lot of cleaning/paint/planning/shopping/yard work and a little electrical.
as for tools its ideal to buy the best quality because theyl last forever.
also, you probably already know this but youtube has a huge amount of informational videos about pretty much anything you could want, so you can learn how to do specific projects the right way. i did this for faucets and replaced mine, thats actually easy to do.
Merica
<I.L.H.|C.O.E.>
RIP YGST
11-27-2020, 09:54 AM
-
#18
11-27-2020, 09:55 AM
-
#19
- MajorTendonitis
- Join Date: Jan 2016
- Location: East Kootenays BC
- Age: 65
- Height: 5'8"
- Weight: 241 lbs
- Posts: 42,002
- Subscribers: 8
- Rep Power: 717192
-
-
Originally Posted By katya422⏩
I srs wouldn’t even consider that set, and battery powered skil saws are a joke .m'kay. wasn't my idea though.
aren't they a lot more expensive?
because you are in Canada maybe?
aren't they a lot more expensive?
because you are in Canada maybe?
Unfortunately,even Dewalt comprises on their kits if you look close . Your not getting their top of the line tools .
As mentioned, buy what you need separately
Back with my Fam
11-27-2020, 09:56 AM
-
#20
Originally Posted By HayZues
someone posted in a review that using a higher capacity battery made the saw work better, but i'm not sue how.Only thing that matters is battery life and warranty length (not some bs extended you have to buy. )
18v seems weak tbh.
18v seems weak tbh.
Originally Posted By propreffered7⏩
thank you. would you look for second hand makita over new ryobi though?possibly. i bet that ryobi could get the job done im just saying they're not the highest quality
my opinion of the brands is makita is the most consistent and has the largest line (other tools you could use batteries for). generally the best batteries too
milwaukee has the most powerful motors but don't last as long and battery life is worse
dewalt fluctuates with certain tools being better than others but also has a large line
my opinion of the brands is makita is the most consistent and has the largest line (other tools you could use batteries for). generally the best batteries too
milwaukee has the most powerful motors but don't last as long and battery life is worse
dewalt fluctuates with certain tools being better than others but also has a large line
INTP Crew
Inattentive ADD Crew
Mom That Miscs Crew
11-27-2020, 09:58 AM
-
#21
- propreffered7
- Registered User
-
- propreffered7
- Registered User
- Join Date: Mar 2010
- Posts: 36,839
- Rep Power: 86393
-
-
Originally Posted By katya422⏩
hmmm.. ive never bought second hand tools. prob not because i wouldn't know how the tool was usedsomeone posted in a review that using a higher capacity battery made the saw work better, but i'm not sue how.
thank you. would you look for second hand makita over new ryobi though?
thank you. would you look for second hand makita over new ryobi though?
11-27-2020, 09:58 AM
-
#22
11-27-2020, 09:58 AM
-
#23
- elterrible987
- Banned
-
- elterrible987
- Banned
- Join Date: Jan 2010
- Posts: 51,859
- Rep Power: 0
-
-
something i only use a few times I will buy cheap harbor frieght chit.
If its something you use a lot buy the higher quality.
Also depends on the tool. Say something like wire strippers, the cheapo ones are chit and wont work right. But something like a mallot, why would i buy a luxury mallot, its pretty simple right.
also would rather have wired for everything except battery powered drills are obviously very convenient. But if you want some tools for life that you will only use every 5 years, prob better its wired. I dont see the reason to have battery powered saws, those are for tradies that use them every day and have back up wired saws too. BRB in 10 years trying to find a battery online for your discontinued saw, that is too much hassle.
If its something you use a lot buy the higher quality.
Also depends on the tool. Say something like wire strippers, the cheapo ones are chit and wont work right. But something like a mallot, why would i buy a luxury mallot, its pretty simple right.
also would rather have wired for everything except battery powered drills are obviously very convenient. But if you want some tools for life that you will only use every 5 years, prob better its wired. I dont see the reason to have battery powered saws, those are for tradies that use them every day and have back up wired saws too. BRB in 10 years trying to find a battery online for your discontinued saw, that is too much hassle.
11-27-2020, 09:59 AM
-
#24
- TimeTravelerBro
- Registered User
-
- TimeTravelerBro
- Registered User
- Join Date: Mar 2016
- Posts: 7,078
- Rep Power: 31384
-
-
Let's be real here. If you're going to buy tools and use them (which you're not) you might aswell buy cheap ass tools from harborfrieght buying quality power tools will run you a pretty penny and if you do use them then they will never get touched again LMAO
11-27-2020, 10:00 AM
-
#25
- dizzin9
- Stay safe bros
-
- dizzin9
- Stay safe bros
- Join Date: Oct 2007
- Location: Okinawa, Japan Stats
- Posts: 31,944
- Rep Power: 205818
-
-
I actually hanged some window blinds the other day and the Ryobi Drill/Driver set for $99 (with 2 battery packs and a charger) helped me get it done.
We’re all gonna make it.
11-27-2020, 10:01 AM
-
#26
- HayZues Christi
- Registered User
-
- HayZues Christi
- Registered User
- Join Date: Oct 2007
- Age: 40
- Posts: 33,178
- Rep Power: 232547
-
-
Originally Posted By katya422⏩
Higher voltage = higher wattage at same amperage. Higher wattage = higher rpm. Rpm = cutting effectiveness of a saw. Especially with a more aggressive blade.someone posted in a review that using a higher capacity battery made the saw work better, but i'm not sue how.
?
?
That kit isn't a good one per say, but it is a good price for it.
Id also throw out that tool rental is very cheap. So the few jobs you're going to need a saw for, rent one for $15. Invest in higher quality batteries for things such as impacts and drivers.
Ol' 71st street. The devil that birthed me.
606 G0D.
11-27-2020, 10:01 AM
-
#27
- BlackJack619
- Registered User
-
- BlackJack619
- Registered User
- Join Date: Sep 2012
- Location: United States
- Posts: 17,066
- Rep Power: 143443
-
-
If you cant fix your issues with wd40 and/or duct tape just call a professional.
As
11-27-2020, 10:02 AM
-
#28
- GooBaaa
- Join Date: Sep 2011
- Location: Buffalo NY
- Posts: 58,814
- Subscribers: 5
- Rep Power: 435522
-
-
Originally Posted By dizzin9⏩
You could have bought a driver set for $100 from Milwaukee or dewalt for that priceI actually hanged some window blinds the other day and the Ryobi Drill/Driver set for $99 (with 2 battery packs and a charger) helped me get it done.
11-27-2020, 10:03 AM
-
#29
- darkninja67
- The Dark Lord
-
- darkninja67
- The Dark Lord
- Join Date: Aug 2009
- Posts: 87,403
- Rep Power: 802217
-
-
Originally Posted By Battlefury⏩
This right hereDon't buy a set only buy the things that you are going to use, you won't be using the whole set.
Big user of Ryobi, solid brand for home owners and their battery system it second to none. Get a supercharger if you go all in on the One Plus 18v line.
Originally Posted By dizzin9⏩
pretty sure Ryobi is a Home Depot specific brand or did they change that?I actually hanged some window blinds the other day and the Ryobi Drill/Driver set for $99 (with 2 battery packs and a charger) helped me get it done.
rumpler of stiltskins
"I'm not afraid to die, I'm afraid I'll survive and have to watch you suffer" - Thy Art Is Murder
"Life will cease so breathe deep" - Lorna Shore
11-27-2020, 10:05 AM
-
#30
- TXBuddy
- Registered User
-
- TXBuddy
- Registered User
- Join Date: Oct 2010
- Location: United States
- Posts: 17,608
- Rep Power: 210472
-
-
I have all Ryobi stuff and a 6 battery charger.
They were great for everything I do from house repairs to working on cars.
have used them for over 19years and they still work with the newer batteries.
A professional would have a different opinion.
I am asking for more of them for Xmas.
They were great for everything I do from house repairs to working on cars.
have used them for over 19years and they still work with the newer batteries.
A professional would have a different opinion.
I am asking for more of them for Xmas.
US Army 1998-2020
Army NG 1992-98
★Combat Veterans Crew★
Texas Tech Alumni '98 & '07
�Tolerance and apathy are the last virtues of a dying society.� ~ Aristotle
*Vasectomy crew
Bookmarks
-
- Digg
-
- del.icio.us
-
- StumbleUpon
-
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts